Engine down!

The engine works continue, now that the top part of the engine is clean and ready to be reassembled. 

The lower part is next: 

- Remove the fly wheel

- Remove the stator

- Remove the clutch

- Remove the crank shaft and bearings

- Clean all

- Replace the bearing,

- Reassemble everything

This is what we started with:

The first step is to take the flywheel out, you need a puller to do this since it is pressure set on the crank shaft and screwed. 

Once this is out, it's the turn of the Stator and Points

Then comes the clutch and roller

This is what the engine block looks like before pulling the crank shaft

And it's out

Time for clean up!